Pro-Ject RPM 5.1 with Ortofon 2M Red, Piano Lacquer

-33 %

RRP 840,00 €

incl. 19% VAT plus shipping
on stock Only 2 units remaining!
Pro-Ject RPM 5.1 with Ortofon 2M Red
Manual turntable with 9" carbon tone-arm  

  • Chassis piano-lacquered dark grey  
  • A quiet running AC motor with a two-step pulley drives the hub and platter via a flat-ground belt.  
  • The medium density fibre plinth stands on three height-adjustable rubber-damped aluminium cones.  
  • The motor is decoupled from the plinth to reduce vibration transmission.  
  • The resonance-optimised platter is a sandwich construction utilising the hub, an medium density fibre platter, a cork mat (a standard felt mat is supplied also) and a screw-down record clamp.  
  • The platter's low-tolerance chrome-plated stainless-steel axle runs on a Teflon bearing plate in a sintered bronze bearing housing.  
  • Central metal block optimises centre of gravity and damps main bearing.  
  • Connection to the phono input of the amplifier can be made with connecting cables of your taste through the gold plated phono sockets and earth screw. A standard cable is provided.  
  • External power supply avoids potential electro-mechanical interference.  
Tonearm 9cc  
  • The turntable is supplied with Ortofon 2M Red MM-cartridge fitted.  
  • The headshell and armtube are fashioned from a single piece of carbon-fibre.  
  • Conical armtube avoids standing wave reflections.  
  • Inverted tonearm bearing comprises four hardened stainless tips in ABEC7 spec ballraces.  
  • Rings provide very solid arm bearing housings. The outside ring is open to avoid resonances.  
  • Design of counterweight effectively counteracts unwanted resonances.  
  • The counterweight supplied is suitable for cartridges weighing between 6 - 10g. Alternative counterweights for cartridges weighing between 11 - 15g, 8 - 11g or 5 - 8g are available as an accessory part.  
  • Counterweight shaft lowered to record level reduces cantilever forces and dynamic wow when playing warped records.  
  • Solid armbase permits accurate height adjustment of armtube and VTA (vertical tracing angle).  
  • Single-screw fixing of armtube allows rotation for easy adjustment of needle azimuth despite fixed headshell.  
  • Silicone-damped armlift can be adjusted to suit working height of the arm.  
  • The internal wiring consists of flexible high-purity copper from the headshell right through to the gold-plated phono sockets.

Technical data
  • Optional fitted cartridge Ortofon 2M Red
  • Amplifier connection MM-input
  • Nominal speeds 33 / 45 / 78 r.p.m. (78 optional)
  • Dust cover Pro-Ject Cover it optional
  • Record clamp yes
  • RCA phono sockets yes
  • Rubber-damped aluminium cones yes
  • Central metal block yes
  • Tonearm Pro-Ject 9cc
  • Tonearm with fibre armtube and sapphire thrust-pads yes
  • Effective tonearm length 9" (230mm)
  • Effective tonearm mass 8,5g
  • Overhang 18mm
  • Supplied counterweight cartridge weight 6 - 10g
  • Optional counterweights cartridge weights 11 - 15g, 8 - 11g, 5 - 8g
  • Downforce range 10 - 30mN
  • Speed variance ±0,5 %
  • Wow and flutter ±0,08 %
  • Signal to noise -70dB
  • Platter weight/diameter 1,75kg/300mm
  • Power supply type Mains-fed outboard power supply 220 - 240V, 50 cycles or 100 - 110V, 60 cycles
  • Output voltage 16V/500mA AC
  • Power consumption 2W
  • Dimension (W x H x D) 371 x 145 x 300mm
  • Weight 6,5kg

PDF-Product information

You receive a 2 year warranty from the date of purchase for all of our high quality hifi-products.

If you observe any problem while using the product, you have the possibility to contact our friendly service team.

You can also easily manage your guarantee concern – without being obliged to – under the section My Account.

Recommended products