QED Reference 40 Digital Audio 3,0 mtr.

-15 %

RRP 199,00 €

plus shipping
on stock Only 2 units remaining!

Sign in with your Amazon credentials and easily pay with the address and payment information stored in your Amazon account.
Reset selection 3,0 mtr.
-15 %
Reference 40 Digital Audio, the new standard for digital coaxial S/PDIF signals.

Reference 40 Digital Audio utilises a carefully engineered geometry to achieve the precise characteristic impedance required for the maximum transfer of S/PDIF signals. Silver plated conductors deliver a low resistance path for high frequencies and QED "Digiloc" plugs more closely match the cable's characteristic  impedance, reducing return loss by up to 1dB when compared to conventional RCA plugs. This ensures optimal signal transfer and improved micro-timing of the audio signal.

Key features:
  • Silver plated signal carriers
  • effective high quality shielding
  • impedance matched cordage
  • plugs all combine to create audible sonic improvements when compared to the competition

Triple Layer Electromagnetic Shielding
Through the use of factory controlled geometry and low permittivity foamed polyethylene dielectrics, Reference Digital Audio 40 maintains the correct characteristic impedance to match the transmission line between digital source and sink precisely. This makes for a very low jitter signal transfer which, listening tests have shown, leads to clearly audible sonic improvements.

75 Ohm Impedance matched DigilocTM RCA plugs
Domestic S/PDIF interfaces use the traditional RCA phono connector which is not impedance matched to the 75 Ohm transmission line. This causes measurable insertion loss and an increase in jitter due to signal reflections at the connector boundaries. The all new Digiloc RCA plugs are more closely impedance matched than ever before and measurements have shown, reduce insertion loss by up to 1.2 dB compared to ordinary RCA plugs.
Triple Layer Electromagnetic Shielding
A dual layer closely woven 99.999% OFC shield braid and aluminium mylar wrap with 100% coverage comprise a triple layer electromagnetic shield coaxially spaced around the central signal carrier within a foamed polyethylene dielectric. This ensures that interference signals induced by nearby high current noise sources do not contribute to higher signal jitter than would otherwise be the case. By the same token the shielding prevents unwanted voltage induced interference escaping the cable which might affect nearby analogue signal carriers.

  • Silver Plated 99.999% Oxygen Free Copper central conductor
  • Extruded foamed Polyethylene (PE) dielectric - for sonic purity and low return loss
  • Double 99.999% OFC braid plus Al/Mylar wrap for 100% electromagnetic screening coverage
  • Twin leaf 24c Gold plated QED ‘Digiloc™’ RCA plugs featuring high purity copper contacts, hollow centre pin and low eddy current design
  • 75 ohm coaxial design with closely matched locking plug for reduced return loss
  • QED Lifetime Guarantee

What this cableis used for
Connect your
  • CD player
  • Blu-Ray player
  • other S/PDIF device output
to your
  • DAC
  • Digital Pre-Amp
  • AV Amplifier
  • other S/PDIF device input
Ultra Low Jitter
Jitter is the undesired deviation from true periodicity of an assumed periodic signal in electronics and telecommunications, often in relation to a reference clock source. A  cable displaying ultra low jitter has been measured at typically 30ps.
You receive a 2 year warranty from the date of purchase for all of our high quality hifi-products.

If you observe any problem while using the product, you have the possibility to contact our friendly service team.

You can also easily manage your guarantee concern – without being obliged to – under the section My Account.