Solidsteel SS Serie Speaker-Stands

Solidsteel SS Serie Speaker-Stands

Overview

• Iconic Loudspeaker Stands – Solidsteel’s Flagship – designed in 1992
• Main frame in steel entirely hand-welded with brass
• Ennobled MDF wood with Lacquered Finish for Top Plates
• Compatible with the majority of bookshelf speakers in the AV market
• 40 kg of maximum load per each stand
• Fillable frame parts
• Adjustable stainless steel spikes and protective floor discs included

Our historical Flagship. It is of critical importance for the performance of monitor-type loudspeakers to have them positioned at the correct height. Additionally, since this type of speaker is often relatively light in weight compared to floor-standing units, it is essential to maintain high stability and rigidity. And, as with all components, proper decoupling must be considered.

The Solidsteel SS Series fulfils a longstanding need regarding the proper setup and enjoyment of monitor speakers, and must in many ways be considered as important as the units they support. The three tubolar supports end with a crimped steel bar. The stainless steel spikes are removable to allow the frame to be filled with damping material. The top plate in MDF is interchangeable, ensuring a high degree of optimization with the largest number of loudspeakers. Decoupling between the chassis and the shelf is achieved through three high precision steel ball bearings.

The originality of the design of these legendary products dates back to 1992, the year in which our founder Moreno Conti produced the first serial production.

These unique tripods are assembled through a traditional brass welding process, wisely performed by expert hands. The average production time of a single piece is about 15 minutes, with all its parts already prepared for processing. These characteristics make them inimitable and unique.

The SS stands are also supplied with “Pata-fix®” to properly fix the speakers to the top plate.

Specifications

• FrameStainless steel: [Ball bearings for decoupling the top plates from the frame], [Regulable spikes], [Protective floor discs (Pads)].
• Steel: [Main Frame, hand-welded with brass]
• Plastic (PLA): [Screw Concealing Spacer]
• Rubber: [O-ring on Top Plates]
• Ennobled MDF wood: Standard Top plates of 160×160 mm (6,3 x 6,3 in); Large of 190×190 mm (7,48 x 7,48 in) .
• Top Plates Dimensions [mm]: SS-5: [190×190] SS-6: [160×160] or [190×190, custom] SS-7: [160×160]
• Top Plates Dimensions [inch]SS-5: [7,48 x 7,48] SS-6: [6,3 x 6,3] or [7,48 x 7,48 custom] SS-7: [6,3 x 6,3]
• Dimensions Height: SS-5: [310 × 330 × 525 mm] SS-6: [310 × 330 × 625 mm] SS-7: [310 × 330 × 725 mm]
• Weight: SS-5 [11 kg] SS-6: [12 kg] SS-7: [13 kg]
• Colours: Black, White, Raw