Gold Note PH-10 Phono Preamp + PSU-10 Power Supply black, Bundle

Gold Note PH-10 Phono Preamp + PSU-10 Power Supply, black, Bundle

Description: Gold Note PH-10 Phono Preamp

Multi-award-winning phono preamp

The PH-10 model is an extremely versatile phono amplifier that has some unique features: two separately programmable inputs with all the important settings such as impedance, gain & different equalization curves. A real analog development, which is realized exclusively with the best components. To control the PH-10, we have developed SKC, a unique technology that, together with the TFT screen, makes all changes and adjustments switchable with a single rotary knob. 6 adjustable EQ curves The frequency response settings shown on the display include curves for six different equalizations, such as RIAA, DECCA LONDON, AMERICAN COLUMBIA, suitable for all old and new recordings. 9 load resistances & 4 gain levels adjustable Nine impedances are available for adapting the pickup: 10, 22, 47, 100, 220, 470, 1000Ω, 22 and 47kΩ. In addition, the gain can be adjusted in 3dB steps. In this way, the phono stage can be operated with any MM and MC pickup in the best possible setting. 2 independent phono inputs. The input is duplicated so that two pickups or turntables can be connected with independent adjustments.

Specifications:

• Inputs: 2x independent RCA (cinch) stereo
• Output internal resistance: 50Ω
• Subsonic filter: 10Hz, 6th order (36dB/oct.)
• Output level: 2V (RCA, cinch) or 4V (XLR)
• Distortion: <0.05%
• Input sensitivity: 0.1mV (MC), 7mV (MM)
• Signal-to-noise ratio: -89dB
• Color finishes: black, silver, gold
• Dynamic range: 105dB
• Dimensions WHD: 200 x 80 x 260 mm
• Frequency response: 20Hz - 20kHz (enhanced to 50kHz) +/-0.3dB
• Weight: 4kg

Description: Gold Note PSU-10 power supply for PH-10 phono preamplifier

Quad power supply with four ultra-low noise voltage regulators and powered by four transformers, three for mains and one for inductive filtering.

Specifications

• Quad audio quality power supply
• Common mode rejection: over 80dB
• Four ultra-low noise voltage regulators
• Rise time: under 2.5μs
• Four ultra-low noise voltage regulators
• Rated power: 25W
• Outputs: 5V and 12V for switching functions
• Peak power: over 50W
• 2x 14V for amplifiers with inductive interference suppression
• Power consumption in idle mode: less than 1W
• Mains regulation of all outputs: 0.05%
• Dimensions: 200 x 80 x 260mm WHD
• Load regulation of all outputs: 0.05%
• Weight: 5kg
• Mains noise rejection: over 80dB
• Mains voltages: 100 .. 120 V and 220 .. 240 V, 50/60 Hz
• With automatic switching