AT33PTG/II
MC-cartridge
Advanced nude tapered boron and weight reduction
This model succeeds in thinning down and shortening the cantilever, compared to the AT33PTG. The coil impedance is also refined from 17 Ohm to 10 Ohm. We realized significant weight reduction of the vibration system and successfully improved the basic performance and sound quality of the cartridge.
High performance and long-life MicroLinear™ stylus
MicroLinear™ (ML) is a specially polished line contact stylus. This has better high range performance than the conical or elliptical stylus due to its small curvature radius and realizes low distortion and expanding high range reproduction even when playing at the inner circumference of records. And the constancy of the line contact shape is one of its main features with an average product lifetime of around 1000 hours.
Specifications
MC-cartridge
Advanced nude tapered boron and weight reduction
This model succeeds in thinning down and shortening the cantilever, compared to the AT33PTG. The coil impedance is also refined from 17 Ohm to 10 Ohm. We realized significant weight reduction of the vibration system and successfully improved the basic performance and sound quality of the cartridge.
High performance and long-life MicroLinear™ stylus
MicroLinear™ (ML) is a specially polished line contact stylus. This has better high range performance than the conical or elliptical stylus due to its small curvature radius and realizes low distortion and expanding high range reproduction even when playing at the inner circumference of records. And the constancy of the line contact shape is one of its main features with an average product lifetime of around 1000 hours.
Specifications
- Type: Dual Moving Coil
- Frequency Response: 15 to 50,000 Hz
- Channel Separation: 30 dB (1 kHz)
- Channel Balance: 0.5 dB (1 kHz)
- Coil Impedance: 10 W (1 kHz)
- DC Resistance: 10 W
- Vertical Tracking Angle: 23 degrees
- Recommended Load Impedance: Min 100 W
- Coil Inductance: 22 mH (1 kHz)
- Static Compliance: 40 x 10 – 6 cm / dyne
- Dynamic Compliance: 10 x 10 – 6 cm / dyne (100 Hz)
- Output Voltage: 0.3 mV (at 1 kHz, 5 cm/sec)
- Stylus Shape: MicroLine™
- Cantilever: Gold-plated solid boron
- Stylus Construction: Nude square shank
- Mount: 1/2” centers
- Dimensions: 16.0 (H) x 16.6 (W) x 26.5 (L) mm
- Weight: 6.9 g
- Accessories: 1 non magnetic screw driver; 2 washers; 2 Nuts; 2 x 13 mm mounting screws; 2 x 19 mm mounting screws; 1 plastic protector; 1 set of PCOCC Lead Wires(AT6101)
You have to be logged in and must have bought this product to write a review.
- No review available for this item.
You receive a 2 year warranty from the date of purchase for all of our high quality hifi-products.
If you observe any problem while using the product, you have the possibility to contact our friendly service team.
You can also easily manage your guarantee concern – without being obliged to – under the section My Account.
If you observe any problem while using the product, you have the possibility to contact our friendly service team.
You can also easily manage your guarantee concern – without being obliged to – under the section My Account.
Other Products
-
NAD MDC HDM-2 HDMI, 4K Modul
429,00 € -
Flux-Hifi Matrixx LS-8 speaker cable Single BiWire 2x3,0 Meter
499,00 € -
Nuprime LPS-205 linear power supply 5V / 28W with USB and DC-Out
450,00 € -
-16 %
Sumiko Blue Point No. 3 high-output MC Cartridge
RRP599,00 €
498,75 € -
Flux-Hifi Matrixx LS-4 speaker cable Single Wire 2x5,0 Meter
379,00 € -
-10 %
Supra Quadrax 2 X 4.0 Bi-Wire CombiCon Crimp Speaker-Cable 2 X 3.0 Meter
RRP469,00 €
422,10 € -
-15 %
Inakustik Referenz LS-104 AIR 2 x 3.0 mtr. Speaker Cable
RRP489,00 €
from 415,65 € -
-21 %
Audio Technica AT OC9XSH MC Cartridge
RRP699,00 €
549,00 €