Ortofon SPU Classic G Mk II Low-Output MC-Cartridge SME
The Ortofon SPU Classic G MkII and Ortofon SPU Classic GE MkII models are technically closely related to the original SPUs from the late 1950s, the ultimate classic. They are literally an inexpensive way to immerse yourself in the beguiling world of sound colors of the SPUs. The pickups differ only in the cut of the diamond: The Ortofon SPU Classic G MkII has a spherical diamond cut, the Ortofon SPU Classic GE MkII an elliptical one.
The bare diamond of these SPUs has less moving mass compared to a bonded diamond. Due to the lower mass inertia, the scanning diamond can follow the groove modulation more easily. More detailed information and improved dynamic behavior are the results that can be heard immediately.
A "bare" version of the SPU Classic is also available, i.e. without a socket, which can be mounted on a headshell with a half-inch attachment.
The ST-7 transformer is a perfect match for the SPU Classic G MkII cartridge.
Technical Data:
The Ortofon SPU Classic G MkII and Ortofon SPU Classic GE MkII models are technically closely related to the original SPUs from the late 1950s, the ultimate classic. They are literally an inexpensive way to immerse yourself in the beguiling world of sound colors of the SPUs. The pickups differ only in the cut of the diamond: The Ortofon SPU Classic G MkII has a spherical diamond cut, the Ortofon SPU Classic GE MkII an elliptical one.
The bare diamond of these SPUs has less moving mass compared to a bonded diamond. Due to the lower mass inertia, the scanning diamond can follow the groove modulation more easily. More detailed information and improved dynamic behavior are the results that can be heard immediately.
A "bare" version of the SPU Classic is also available, i.e. without a socket, which can be mounted on a headshell with a half-inch attachment.
The ST-7 transformer is a perfect match for the SPU Classic G MkII cartridge.
Technical Data:
- Output voltage at 1000 Hz, 5cm/sec. - 0.2 mV
- Channel balance at 1 kHz < 1 dB
- Channel separation at 1 kHz > 20 dB
- Channel separation at 15 kHz > 10 dB
- Frequency response - 20-20.000 Hz + 3/- 3 dB
- Tracking ability at 315Hz at recommended tracking force *) > 60 µm
- Compliance, dynamic, lateral - 8 µm/mN
- Stylus type - Nude Spherical
- Stylus tip radius - R 18 µm
- Tracking force range - 3.0-5.0 g (30-50 mN)
- Tracking force, recommended - 4.0 g (40 mN)
- Tracking angle - 20°
- Internal impedance, DC resistance - 2 ohm
- Recommended load impedance > 10 ohm
- Cartridge body material - Ground wood and resin composite
- Coilwire material - High Purity Copper (OFC)
- Cartridge colour - Black matte
- Cartridge weight - 28 g
PDF-Product information
You have to be logged in and must have bought this product to write a review.
- No review available for this item.
You receive a 2 year warranty from the date of purchase for all of our high quality hifi-products.
If you observe any problem while using the product, you have the possibility to contact our friendly service team.
You can also easily manage your guarantee concern – without being obliged to – under the section My Account.
If you observe any problem while using the product, you have the possibility to contact our friendly service team.
You can also easily manage your guarantee concern – without being obliged to – under the section My Account.
Other Products
-
Rega RB 880 Tonearm, black
999,00 € -
Pro-Ject 10CC Evolution 10 Inch Carbon Tonarme
RRP999,00 €
979,00 € -
-5,7 %
Ortofon 2M Black LVB 250 MM-Cartridge
RRP1.059,00 €
998,00 € -
-11 %
Sumiko Songbird High-Output MC Cartridge
RRP999,00 €
888,00 € -
Rega Ania Pro MC Cartridge
1.099,00 € -
Ortofon SPU Classic G Mk II Low-Output MC-Cartridge SME
1.199,00 € -
Thorens cartridge TAS 1600 MC
1.199,00 € -
Starter Cusis E MC Cartridge by Michell Engineering
1.099,00 €