Audio Technica VM520EB
Dual MM Stereo Cartrige with elliptical (Bonded) stylus (Replaced AT100E)
Standard elliptical stylus model equipped with an elliptical bonded stylus. This reduces tracing distortion and allows for more accurate sound reproduction.
Para-toroidal coils improve generating efficiency and offers superb linearity, since leakage of magnetic flux in this continuous and unitised magnetic circuit is low. Permeability of the cores is also optimised through the use of laminated cores.
Centre shield plate reduces crosstalk
A permalloy centre shield plate enables the effective separation of left and right channels, suppressing electrical crosstalk to below 40dB. This is similar to the actual crosstalk value found in the grooves of the record itself.
Specifications
Dual MM Stereo Cartrige with elliptical (Bonded) stylus (Replaced AT100E)
Standard elliptical stylus model equipped with an elliptical bonded stylus. This reduces tracing distortion and allows for more accurate sound reproduction.
- Aluminium cantilever
- Para-toroidal coils improve generating efficiency
- Centre shield plate between the left and right channels reduces crosstalk
- Durable low resonance polymer housing
Para-toroidal coils improve generating efficiency and offers superb linearity, since leakage of magnetic flux in this continuous and unitised magnetic circuit is low. Permeability of the cores is also optimised through the use of laminated cores.
Centre shield plate reduces crosstalk
A permalloy centre shield plate enables the effective separation of left and right channels, suppressing electrical crosstalk to below 40dB. This is similar to the actual crosstalk value found in the grooves of the record itself.
Specifications
- Mounting 1/2” centres
- Frequency Response 20 - 23,000Hz
- Channel Separation 27dB (1kHz)
- Output Channel Balance 1.5dB (1kHz)
- Output Voltage 4.0mV (1kHz, 5cm/sec.)
- Vertical Tracking Angle 23˚
- Vertical Tracking Force Range 1.8 – 2.2g (2.0g standard)
- Stylus Shape Elliptical Bonded
- Stylus Size 0.3 x 0.7 mil
- Stylus Construction Bonded Round Shank
- Cantilever Aluminium Pipe
- Coil Impedance 2,700Ω (1kHz)
- Static Compliance 35 x 10-6 cm/dyne
- Dynamic Compliance 8 x 10-6 cm/dyne (100Hz)
- Recommended Load Impedance 47,000Ω
- Recommended Load Capacitance 100 – 200pF
- Weight 6.4g
- Dimensions 17.3 (H) x 17.0 (W) x 28.2 (L) mm
- Replacement Stylus VMN20EB
- Accessories Included Cartridge installation screws 5mm ×2 and 10mm ×2, Washer ×2, Hexagon nut ×2, Non-magnetic screwdriver ×1, Brush ×1, Lead wire set ×1
You have to be logged in and must have bought this product to write a review.
- No review available for this item.
You receive a 2 year warranty from the date of purchase for all of our high quality hifi-products.
If you observe any problem while using the product, you have the possibility to contact our friendly service team.
You can also easily manage your guarantee concern – without being obliged to – under the section My Account.
If you observe any problem while using the product, you have the possibility to contact our friendly service team.
You can also easily manage your guarantee concern – without being obliged to – under the section My Account.
Other Products
-
-11 %
Ortofon Stylus 2M Blue - Replacement needle
RRP149,00 €
132,00 € -
-17 %
Sumiko Pearl MM Cartridge
RRP149,00 €
123,37 € -
-13 %
Ortofon Concorde Music Red MM Cartridge with Headshell
RRP149,00 €
129,00 € -
-12 %
Audio Technica VMN95ML Stylus - replacement needle, microlinear
RRP159,00 €
138,89 € -
-16 %
Audio Technica VM 610 MONO Dual Stereo Cartridge for Mono Vinyl
RRP149,00 €
125,13 € -
-20 %
Audio Technica VM 520EB Dual MM Stereo Cartrige with elliptical (Bonded) stylus
RRP129,00 €
102,83 € -
-7,8 %
Pro-Ject Pick it S2 C Cartridge
RRP129,00 €
118,87 € -
-23 %
Audio technica VM 530EN Dual MM Stereo Cartrige with elliptical stylus
RRP189,00 €
144,53 €