ATR Celebration 40 Super Pack 2 Turntable with SPU ATR Celebration 40 and Ortofon ST-7, white
Consistently classically perfected! At the beginning of the 1990s, when the LP had long been overtaken by the CD and almost all record player factories were closed, Pro-Ject dared to start over as a record player manufacturer. At that time, ATR - Audio Trade was the world's first sales partner, and today Pro-Ject is the world's largest producer of analogue drives in the high-quality sector.
Reason enough to celebrate ATR's 40th anniversary with a turntable created especially for this occasion: With the ATR Celebration 40, we have chosen the best-of turntable from the cornucopia of technical possibilities offered by our partners Pro-Ject and Ortofon for our fortieth anniversary ATR Celebration 40 granted.
The ATR Celebration 40 Pure is available in its pure form without a pickup or in two sets with a price advantage. In the SuperPack 1, it comes with a low-output MC pickup, the Ortofon SPU ATR Celebration 40, which has won multiple awards. The Ortofon 6NX TSW-1010-5P phono cable that comes with the turntable guarantees the best signal transmission. And if you like it very classic, you can also add the Ortofon ST-7 MC transformer to the SuperPack 2 (this version).
A transformer (in principle high-precision wound and shielded coils) passively helps the weak output signal of a low-output MC pickup, so that the use of an MM phono preamplifier becomes possible. Positive side effect: With a transformer, potential negative mains influences have no effect on the critical first amplification and no additional noise can arise. Ideal not only for tube amplifiers where there should be no transistor in the signal path.
Features
**at 1000Hz, 5cm/sec. **at recommended tracking force. (1 inch = 2.54cm)
Consistently classically perfected! At the beginning of the 1990s, when the LP had long been overtaken by the CD and almost all record player factories were closed, Pro-Ject dared to start over as a record player manufacturer. At that time, ATR - Audio Trade was the world's first sales partner, and today Pro-Ject is the world's largest producer of analogue drives in the high-quality sector.
Reason enough to celebrate ATR's 40th anniversary with a turntable created especially for this occasion: With the ATR Celebration 40, we have chosen the best-of turntable from the cornucopia of technical possibilities offered by our partners Pro-Ject and Ortofon for our fortieth anniversary ATR Celebration 40 granted.
The ATR Celebration 40 Pure is available in its pure form without a pickup or in two sets with a price advantage. In the SuperPack 1, it comes with a low-output MC pickup, the Ortofon SPU ATR Celebration 40, which has won multiple awards. The Ortofon 6NX TSW-1010-5P phono cable that comes with the turntable guarantees the best signal transmission. And if you like it very classic, you can also add the Ortofon ST-7 MC transformer to the SuperPack 2 (this version).
A transformer (in principle high-precision wound and shielded coils) passively helps the weak output signal of a low-output MC pickup, so that the use of an MM phono preamplifier becomes possible. Positive side effect: With a transformer, potential negative mains influences have no effect on the critical first amplification and no additional noise can arise. Ideal not only for tube amplifiers where there should be no transistor in the signal path.
Features
- Pickup Ortofon SPU ATR Celebration 40
- MC transformer Ortofon ST-7 included
- Chassis filled with metal granulate
- Inverted platter bearing, magnetically assisted
- Plate bearings with ceramic running surfaces
- Tonearm Pro-Ject 9cc Evolution in special design
- 33/45 rpm (electronic)
- Dust cover included
- Chassis in matt white
- Electronic speed selection between 33 and 45 rpm
- Chassis made of compressed wood fibers filled with metal granules for damping, with four TPE-damped aluminum feet
- The platter is a sandwich construction made of a finely balanced platter made of aluminum dampened with TPE, a 4mm thick surface-ground surface made of vinyl and a record puck
- The inverted, magnet-assisted platter bearing consists of a standing stainless steel axle with a ceramic ball on which a bushing with a ceramic bearing base rotates
- Integrated motor control (sine generator)
- External power supply to protect against mechanical and electromagnetic interference
- Clear acrylic dust cover included
- Straight 9 inch tonearm
- Assembled and adjusted Ortofon SPU ATR Celebration 40 low-output MC cartridge
- Counterweights for pickups from 10 - 16g weight included. Additional counterweights available as optional accessories
- The headshell and tonearm tube are made from a single piece of carbon fiber/aluminium composite
- The tone arm tube can be twisted after loosening a screw. Despite the fixed headshell, this allows horizontal (azimuth) adjustment of the pickup
- The possibility of adjusting the working height of the tonearm allows vertical adjustment of the pickup (VTA)
- Four hardened stainless steel tips mounted in ABEC 7 ball bearings form the inverted tonearm bearings
- Individual AF cables can be used on the 5-pin tonearm socket to connect to the phono input of the amplifier
- High-quality tonearm cable Ortofon 6NX TSW-1010-5P (length approx. 120cm) included
- Ortofon ST-7 transformer
- Solid metal housing protects the electronics from vibrations and interference
- Compact design makes it possible to place it close to the turntable
- Dual mono construction with individual MU metal shielding for high crosstalk attenuation
- Device works without power supply, therefore no interference from the mains
- Hard gold plated RCA jacks with Teflon insulation
- When using the included MC transformer at the MM input
- W x H x D: 465 x 175 x 350mm, 465 x 430 x 420mm (hood open)
- Weight: 15.6 kg
- Output voltage: 0.2mV**
- Channel deviation at 1 kHz: <1dB
- Crosstalk attenuation at 1kHz: >20dB
- Crosstalk attenuation at 15kHz: >10dB
- Frequency range: 20-25,000Hz
- Frequency Response: 20-20,000Hz ±3dB
- Scanning capability at 315Hz: 65µm**
- Needle compliance: 8µm/mN
- Scanning diamond: elliptical
- Rounding: r/R 8/18µm
- Tracking force range: 30-50mN (3.0-5.0g)
- recommended Tracking force: 40mN (4.0g)
- Scanning angle: 20 degrees
- DC resistance: 2 ohms
- recommended Termination resistance: >10 ohms
- Weight: 13g
- Recommended pickup terminator: 2-60 ohms
- Frequency Response: 15-45,000Hz (-2.5dB / +0dB)
- Gain/1kHz: 24dB
- Output voltage / 1kHz
- 3.17mV at 0.2mV
- Output: 47kOhm / 200pF
- Dimensions W x H x D (D with sockets): 122 x 43.5 x 102 (113) mm
- Weight: 790g
**at 1000Hz, 5cm/sec. **at recommended tracking force. (1 inch = 2.54cm)
You have to be logged in and must have bought this product to write a review.
- No review available for this item.
You receive a 2 year warranty from the date of purchase for all of our high quality hifi-products.
If you observe any problem while using the product, you have the possibility to contact our friendly service team.
You can also easily manage your guarantee concern – without being obliged to – under the section My Account.
If you observe any problem while using the product, you have the possibility to contact our friendly service team.
You can also easily manage your guarantee concern – without being obliged to – under the section My Account.
Other Products
-
NAD C298 Stereo Power Ampflifier, graphite
In our store2.399,00 € -
-10 %
Pro-Ject X8 Turntable with True Balanced Connection, without Cartridge
RRP1.999,00 €
1.798,00 € -
-20 %
ATR Celebration 40 Super Pack 1 Turntable with SPU ATR Celebration 40 Cartridge, white
RRP2.495,00 €
1.998,00 € -
-20 %
Audio Technica AT LPW50 PB Turntable with MM-Cartridge and Phono-Stage, black
RRP429,00 €
343,00 € -
-40 %
New Horizon 129 Turntable including Cartridge AT-91R dark grey
From AdvertisingRRP649,00 €
389,40 € -
-40 %
New Horizon 202 Turntable incl. dust cover and Cartridge AT-91R black
From AdvertisingRRP1.249,00 €
749,40 € -
-40 %
New Horizon 203 turntable incl. dust cover Cartridge AT-VM540ML black
From AdvertisingRRP1.799,00 €
1.079,40 € -
Creek 4040 A Stereo Integrated Amplifier with DAC silver
998,00 €